Types of marble fountains

Uncategorized

There are various types of fountains to gratify various purposes. Some of the most common are;

 

  1. Indoor fountains: Handy enough to fit indoors.
  2. Cascading fountain: Flows from the top to the bottom level
  3. Wall fountains: Stonewall fountains are usually very easy to install and can be used either indoors or outdoors.
  4. Garden fountain: The fountain type to use for your garden depends on your taste. Majorly, dramatic fountains are used like the stone wall fountain, 3-tier fountains, and those with unique carvings.

 

Installing your 3-tier fountain in your home or garden is easy.

 

The Complete Guide to Assembling a 3-tier Stone  Water  Fountain

   

They are two ways to assemble your 3-tier water marble fountains. You can either decide to install it with or without first building a foundational base. If you decide to go with the former, follow the steps as a guide.

 

Step one: You would need some materials, including building blocks layered up and cemented together. This should be done in a dug circle to create a base for the fountain. 

 

Step two: Build a trench to connect electrical pipes underneath the ground. You might also need a cal spa pump. 

 

Step three: Start by placing the first tier on the support placed in the middle of the basin.

 

Step four: Pass the pipe through the hole in between the basin. Following the same procedure, insert the other two ceramic plates on it.

 

Step five: Turn on the pump supply and see if it works. If it does, your fountain is ready.

 

Note that you would most likely require a lift to get the ceramic off the ground and into the stipulated space.

 

There are some 3-tier water stone fountains you may purchase and do not require building a foundational base. 

 

Step one: Locate the channel/hole that comes with the base and bowl and places the pipes and pumps in.

 

Step two: After placing the pipes through the first bowl and second support, place the next tier. Also, pass the pipes through the next.

 

Step three: Following the same order, get the third tier with your lift. The last one usually weighs less than the others, depending on the structure.

 

Step four: Place your pipes correctly and test to see if the water flows correctly.

 

Final note

There are various types of fountains. The type you purchase determines the system of installation. If you want to purchase a 3-tier or stone wall fountain, get the latest, modern and beautiful designs from us.